0086-550-7096433
    Disclaimer|Sitemap| Contact

Advantages and applications of wire and cable flexibility

According to the model, it can be roughly divided into the following categories:

Flexible control cable

1. PVC outer sheath flexible control drag chain cable, flame retardant CC101, bending radius: 8x

2. PVC outer sheath flexible shielding control drag chain cable, flame retardant cc111, bending radius: 10x

3. PVC outer sheath flexible control drag chain cable, flame retardant cc120, bending radius: 5x

4. PVC outer sheath flexible shielding control drag chain cable, flame retardant cc121, bending radius: 8x

5. Pur outer sheath flexible control drag chain cable, oil resistance, hydrolysis resistance, UV resistance, low temperature resistance, wear resistance, flame retardant cc127, bending radius: 8x

6. Pur outer sheath flexible control shielded drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant cc117, bending radius: 10x

7. Steel wire braided flexible control drag chain cable, UV resistant, low temperature resistant, wear-resistant, cc158, bending radius: 10x

8. PETP outer sheath flexible control drag chain cable, oil resistance, hydrolysis resistance, UV resistance, low temperature resistance, wear resistance, flame retardant cc160, bending radius: 5x

9. PETP outer sheath flexible control shielded drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant cc133, bending radius: 10x

Flexible power cable

10. PVC outer sheath flexible power drag chain cable, flame retardant cc305, bending radius: 8x

11. PVC outer sheath shielded flexible power drag chain cable, flame retardant cc336, bending radius: 10x

12. PETP outer sheath flexible shielded power drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant cc358, bending radius: 10x

13. PETP outer sheath flexible shielded power drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant cc371, bending radius: 8x

Flexible data / bus cable

14. PVC outer sheath flexible shielded data drag chain cable. CC41 bending radius: 8x

15. Pur outer sheath flexible shielded data drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant ****, bending radius: 10x

16. PETP outer sheath flexible shielded data drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant cc46, bending radius: 10x

17. PETP outer sheath flexible shielded data drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant CC48, bending radius: 12x

Flexible servo cable

18. Pur outer sheath flexible shield servo drag chain cable, oil resistant, hydrolysis resistant, UV resistant, low temperature resistant, wear resistant, flame retardant cc46, bending radius: 10x

Flexible cables are different from ordinary fixed installation cables. Please refer to the following installation and precautions during installation:

1. The laying of drag chain cable shall not be twisted, that is, the cable shall not be untied from one end of the cable drum or cable reel, but the drum or cable reel shall be rotated first to unfold the cable, and the cable can be unfolded or suspended if necessary. The cable used in this occasion can only be obtained directly from the cable coil

2. Pay attention to the z.ui small bending radius of the cable. (relevant information can be found in the selection table)

3. The cables shall be laid loose side by side in the drag chain and arranged separately as far as possible. They shall be separated by spacers or penetrated into the separation cavity of the support neutral. The gap between the cables in the drag chain shall be at least 10% of the cable diameter

4. The cables in the drag chain shall not touch each other or be trapped together

5. Both points of the cable must be fixed, or at least at the moving end of the drag chain. Generally, the distance between the moving point of the cable and the end of the drag chain shall be 20-30 times of the cable diameter.

6. Please ensure that the cable moves completely within the bending radius, that is, it cannot be forced to move. In this way, the cables can move relative to each other or with the guide device. After a period of operation, z.ui can check the position of the cable. The inspection must be carried out after the push-pull movement.

7. If the drag chain is broken, its cable also needs to be replaced, because the damage caused by excessive stretching cannot be avoided.

Advantages of flexible cable

Under the condition of meeting the same electrical requirements, the flexible cable has smaller outer diameter and lighter weight than other similar cables. The bending performance of flexible cable is very good. The small bending radius of z.ui can reach 5 times of the outer diameter of the cable.


Browse:
Return To The Top